COOLSOON HOLDINGS (AUSTRALIA)
SHENZHEN COOLSOON REFRIGERATION CO., LTD

Mold Temperature Controller

Coolsoon full-automatic mold temperature controller can precisely control the mold temperature, greatly shorten the the mold opening time and decrease the quantity of defective products. It also improves the gloss of the formed products and enhances the quality of the products.

Both water type mold temperature controller and oil type mold temperature controller are available for selection.

Water type - models & specifications of Mold temperature controller:

Oil type - models & specifications of Mold temperature controller:

Features of Mold temperature controller:

  • High pressure and big flow German and Italian pump( water pump or oil pump) with high stability and long service life.
  • Original PLD intelligent automatic calculation temperature controller, precisely control and display the temperature at ±1℃.
  • Stainless steel heating barrel and oil tank, corrosion resisting and not rusty.
  • Main SCHNEIDER electrical components and isolated design for operated electrical box and casing, preventing the steamed water and heat.
  • Fast heating and cooling, stable temperature control.
  • Perfect safety protection and error indicating system, LED light indicating and buzzer alarming when error detected.
  • Simple and easy operation panel with elegant design.


Water type - models & specifications of Mold temperature controller:

 Technical parameters of water type MTC
Mode CM-3W CM-6W CM-9W CM-12W CM-18W CM-24W CM-3WT CM-6WT CM-9WT CM-12WT
Heating Medium  Water
Temperature range 30~100 30~140
Heating capacity KW 3 6 9 12 18 24 3 6 9 12
Power supply voltage Volt 3Phase-380V-50HZ
Pump Power KW 0.37 0.37 0.75 1.5 1.5 2.2 0.37 0.37 0.75 0.75
Max.flow rate L/min 42 42 56 110 110 250 40 40 60 60
Max.pressure kg/c㎡ 2.8 2.8 3.8 4.5 4.5 2.6 3.8 3.8 5.8 5.8
Cooling method Direct cooling Indirect cooling
Pipe diameter Heating pipe diameter lnch 3/8" 3/8" 3/8" 3/8" 1" 1" 3/8" 3/8" 3/8" 3/8"
Inlet /outlet port Qty. 2×2 2×2 2×2 3×2 1×2 1×2 2×2 2×2 2×2 3×2
Cooling pipe diameter lnch 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
Dimension mm 650 650 650 660 800 800 650 650 650 700
320 320 320 330 430 430 320 320 320 350
550 550 550 550 650 650 550 550 550 600
Weight kg 60 65 85 100 120 130 65 70 75 100
Note:
For the water type MTC,  the water pressure should ≥2kgf/mm2 when it connect with running water. If any special requirements  , please specify when placing the order.
We reserve the right to modify the above information without further notice.

Oil type - models & specifications of Mold temperature controller:

Technical parameters of oil type MTC
Mode CM-3H CM-6H CM-9H CM-12H CM-18H CM-24H CM-9HT CM-12HT CM-18HT CM-24HT
Heating medium Oil
Temperatur range 30~200 30~300
Heating capacity KW 3 6 9 12 18 24 9 12 18 24
Power supply voltage Volt 3Phase-380V-50HZ
Pump 功率Power KW 0.37 0.37 0.75 1.5 1.5 2.2 1.5(1.5) 1.5(1.5) 2.2(3.0) 3.0(3.0)
Max.flow rate L/min 42 42 56 110 110 250 125(80) 125(80) 160(140) 200(140)
Max.pressure kg/c㎡ 2.8 2.8 3.8 4.5 4.5 2.6 2.2(5.0) 2.2(5.0) 2.5(6.5) 2.8(6.5)
Cooling method Indirect cooling
Pipe diameter Heating pipe diameter lnch 3/8" 3/8" 3/8" 3/8" 1" 1" 1" 1" 1" 1"
Inlet/Outlet port Qty. 2×2 2×2 2×2 3×2 1×2 1×2 1×2 1×2 1×2 1×2
Cooling pipe diameter lnch 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
Dimension mm 650 650 650 680 800 800 1200 1200 1200 1200
320 320 320 350 430 430 560 560 560 560
580 580 580 600 700 700 1200 1200 1200 1200
Weight kg 70 75 100 115 150 160 115 135 145 160
Note:
If any special requirements, pls specify when placing the order. The above red parameters are made by taking the German brand "SPECK"high temperature pump.
We reserve the right to modify the above information without further notice.

Mold Temperature Controller, Mould Temperature Controller, Water Chiller Supplier


Leave a message

Send Us A Message

We'd Like To Hear From You

*